Welded ball valve can be used with suspended particles
It is widely used in various fields. Its superior quality high-performance stability cannot be achieved by ordinary cast steel ball valves. The service life of fully welded ball valves is much longer than that of cast steel ball valves. Fully welded ball valves are widely used in urban gas, urban Heating, petrochemical, shipbuilding, steel, pressure regulating stations, power plants other pipeline equipment.
Features:
1. The welded ball valve body structure is integrally welded, there will be no external leakage.
2. The valve seat is composed of a PTFE sealing ring a spring, which has strong adaptability to changes in pressure temperature, will produce any leakage within the scope of use.
3. The anti-leakage structure of the valve stem, there is a PTFE self-sealing gasket an O-ring at the bottom of the valve stem, there are 2 O-rings two PTFE sealing gaskets on the top to ensure no leakage.
4. The material of the welded ball valve body is the same as that of the pipeline, there will be no uneven stress, nor will it be squeezed deformed due to earthquakes vehicles passing through the ground.
5. The valve body is light easy to keep warm.
6. The directly buried ball valve can be directly buried in the ground, no need to build tall valve wells, only small shallow wells are needed on the ground, which greatly saves construction costs engineering time.
7. The length of the valve body the height of the valve stem can be adjusted according to the construction design requirements of the pipeline.
8. The processing operation of the sphere is easy there is no adverse interference.
10. There are two connection methods of welding flange.
11. Operation mode: handle, gear (vertical/horizontal)
12. Under the condition of normal operation use of the valve, the warranty period is 20 years.
Welded ball valves are suitable for media with suspended particles:
Because the movement between the ball the valve seat of the welded ball valve has the effect of wiping, the ball valve can be suitable for the medium with suspended particles. However, solids with abrasive particles can damage the soft seat the surface of the ball. For media with longer tougher fibrous materials, the use of fully welded ball valves can also cause problems because these fibers are entangled on the ball. .